GFE安全帽紫外线预处理箱
一、安全帽紫外线预处理箱仪器介绍
专业用于安全帽的紫外线照射预处理，广泛应用于特种劳动防护用品监督检验站、建筑科学研究院、建筑工程检测站。
二、安全帽紫外线预处理箱详细参数
●紫外线照射源：450W高压短脉冲氙气灯
●降温方式：风冷式，有效保障仪器内部温度低于60℃
●采用高精度温度传感器，测试温度精度0.2％
●照射时间定时范围： 0~999小时，测试时间精度：1min
●预处理安全帽数量： 1—14顶
●优质冷轧板电控箱体和优质不锈钢材质实验箱体
●具有氙灯熄灭自动停止计时功能
●保护系统：设备内部配备保护系统，如果发现设备故障，会自动切断全部实验舱内电源，有效保障设备与实验室的安全
三、安全帽紫外线预处理箱符合标准
GB/T 2812－2006《安全帽测试方法》、GB/T 2811－2007《安全帽》
GFE helmet uv pretreatment box
I. introduction of uv pretreatment box for safety helmet
It is widely used in the pretreatment of uv irradiation for hard hats, which is widely used in the supervision and inspection station of special labor protection products, building science research institute and construction engineering inspection station.
2. Detailed parameters of the uv pretreatment box of the helmet
Uv irradiation source: 450W high pressure short pulse xenon lamp
Low cooling method: air-cooled, effective guarantee instrument internal temperature falls below 60 ℃
The high precision temperature sensor is used to test the temperature accuracy of 0.2%
Time range: 0~999 hours, accuracy of test time: 1min
Number of pretreatment safety caps: 1-14 top
High quality cold rolling plate electric control box and high quality stainless steel material experiment box body
A xenon lamp extinguishes the timing function automatically
Protection system: the equipment is equipped with protection system. If the equipment fails, it will automatically cut off all the power supply in the laboratory and ensure the safety of the equipment and laboratory
3. The uv pretreatment box of the helmet conforms to the standard
GB/T 2812-2006 "safety helmet test method", GB/T 2811-2007 "hard hat"
